Focus on food and drug, electronic industry
Cleanroom One-Stop Solution
7*24h Service Hotline
Purification project
热门关键字：食品净化车间 医药洁净车间 低温车间 洁净室 无尘洁净室
Laser workshop-Minebar
Category:
Project Description
MinebarCleanroomRenovation work
Project Name：Minebar Suntrust Plastic Industry (Shanghai) Co.
Project content：100,000 class purification project
Industry Category：Injection molding purification project
■ Introduction to Minebar
Minebar Plastic Technology (Shanghai) Co. office address is located in China's big city, the magic capital of Shanghai, Shanghai Shanghai City, Jiading District, Malu Town, Shangxue Road, No. 468, Building 1, Block B, Block 2, Block B, was registered in the Shanghai Municipal Bureau of Industry and Commerce on June 13, 2006, in the company development and growth of 13 years, we always provide customers with good products and technical support, sound after-sales service, our company is mainly engaged in the design and production of molds and injection parts, sales of our own products; baby products, toys, plastic products, textiles, bedding, knitted goods and raw materials, household goods, kitchen utensils, toiletries, furniture, electronic products, cultural and sports goods and equipment.
■ Based on
100,000 class clean room standards, 100,000 class clean room standards are：
Maximum allowable number of dust particles (per cubic meter)；
The number of particles larger or equal to 0.5 microns cannot exceed 3500000, and the number of particles larger or equal to 5 microns cannot exceed 20000；
Microorganism maximum allowable number；
Class 100,000 clean room standard is that the number of planktonic bacteria should not exceed 500 per cubic meter；
The number of settling bacteria should not exceed 10 per Petri dish.
Differential pressure: the same cleanliness level of the clean workshop pressure difference to maintain consistent, for different cleanliness level of the adjacent clean workshop between the pressure difference to ≥ 5Pa, clean workshop and non-clean workshop to ≥ 10Pa.
Class 100,000 clean room on temperature, humidity no special requirements, to wear clean clothes do not produce a sense of comfort, the temperature is generally controlled in the autumn and winter 20 ~ 22 ℃; spring and summer 24 ~ 26 ℃; fluctuations ± 2 ℃. The air humidity of the clean room in autumn and winter is controlled at 30-50%, and the air humidity of the clean room in spring and summer is controlled at 50-70%.
Power distribution: clean room (area) of the main production land general illumination value is appropriate ≥ 300Lx; auxiliary studio, personnel clean and material clean with room, airlock room, aisle, etc. illumination value is appropriate for 200 ~ 300Lx.
Noise Control
1. During dynamic testing, the noise level in the 10,000-grade clean room shall not exceed 70 dB A.
2. When static testing, the noise level of the 10,000-class chaotic flow clean room cannot exceed 60 dB A.
Airflow organization
The main air supply methods used in Class 100,000 clean rooms；
1、Partial orifice plate roof air supply；
2、With diffuser plate high efficiency air filter roof air supply；
3, the upper side wall air supply and other three air supply methods.
The main return air method used in class 100,000 clean rooms；
1、The lower part of the single side wall arranges the return air outlet；
2、When using aisle return air, evenly arrange the return air inlet in the aisle or set the return air inlet centrally at the end of the aisle.
Air velocity of air supply outlet m/s：
1, orifice plate orifice 3~5.
2、Side air supply outlet：
(1) Adherent jet 2~5；
(2) non-adherent jet with the lower side wall return air 1.5 ~ 2.5, the lower side wall return air 1.0 ~ 1.5.
Wind speed at return air outlet (m/s)：
1. Clean room return air outlet not exceeding 2.
2. The return air outlet in the aisle is not more than 4.
Choose us Five advantages
Focus on food and drug, electronic industry clean room one-stop solution 18years since the establishment of a professional safety management system
18 years industry experience
1、18 years industry experience
◆ 18 years of precipitation
◆ 200 successful cases
◆ Repeat customers and word-of-mouth customers account for a high percentage
◆ Increasing number of well-known corporate clients
Construction Level 2 Qualified Enterprise
2、Construction Level 2 Qualified Enterprise
◆ Decoration Level 2 Qualification, Mechanical and Electrical Level 3 Qualification, General Contractor of Construction Level 3 Qualification
◆ Have a safety production license
◆ Self-built professional safety management system
◆ Zero major safety accidents since 18 years
3、60 technicians of all kinds
60 technicians of all kinds
◆ We can design and build high level GMP workshop class A and class 1 clean room
◆ Tailor-made design solutions
◆ Project design are strictly implement GB50073-2013\GB 50473-2008\GB50457- 2008 and other national standard clean specification and the United States federal 209E standard
Third party acceptance test verification
4、Third party acceptance test verification
◆ Self-provided full set of testing instruments, first self-test after third-party testing
◆ The project construction strictly implements national GMP, US FDA and EU Euro GMP and other domestic international standards.
Customer Focused
5、Customer Focused
◆ Complete standardized process to ensure the construction period and quality
◆ One year after the warranty period, take the initiative to visit 2 times and 1 time at home
◆ We are convinced that our work is only valuable if the users are satisfied.
Building 29, Lane 156, Changji Road, Jiading District, Shanghai
Project Case
Cleanroom products
Copyright © Shanghai Tobetter Purification Equipment Installation Engineering Co. LTD All rights reserved.
