Focus on food and drug, electronic industry
Cleanroom One-Stop Solution
7*24h Service Hotline
Purification project
热门关键字：食品净化车间 医药洁净车间 低温车间 洁净室 无尘洁净室
Cleanroom for toiletries-Light Beauty Biotechnology
Category:
Project Description
Light Beauty Cleanroom Renovation work
Project Name：Shanghai Bright Beauty Biotechnology Co.
Project content：Clean room decoration project
Industry Category：Cosmetic purification project
■Introduction of Bright Beauty
Shanghai Bright Beauty Biotechnology Co. is a high-tech enterprise incorporated in August 2002, located in Sheshan Industrial Zone, Songjiang District, Shanghai, covering an area of 10,600 square meters, including 4,500 square meters for the main plant and warehouse for canning, 1,500 square meters for the integrated packaging workshop under construction, and 4,600 square meters for future development. 4600 square meters, with a total investment of 10 million RMB. Ltd. is a high-tech enterprise specializing in the production, research and sales of cosmetics and toiletries, and has established long-term and stable cooperative relationships with well-known enterprises at home and abroad.
■ Design basis
100,000 class clean room standards, 100,000 class clean room standards are：
Maximum allowable number of dust particles (per cubic meter)；
The number of particles larger or equal to 0.5 micron cannot exceed 3500000, and the number of particles larger or equal to 5 micron cannot exceed 20000；
Microorganism maximum allowable number；
Class 100,000 clean room standard is that the number of planktonic bacteria should not exceed 500 per cubic meter；
The number of settling bacteria should not exceed 10 per Petri dish.
Differential pressure: the same cleanliness level of the clean workshop pressure difference to maintain consistent, for different cleanliness level of the adjacent clean workshop between the pressure difference to ≥ 5Pa, clean workshop and non-clean workshop to ≥ 10Pa.
Class 100,000 clean room on temperature, humidity no special requirements, to wear clean clothes do not produce a sense of comfort, the temperature is generally controlled in the fall and winter 20 ~ 22 ℃; spring and summer 24 ~ 26 ℃; fluctuations ± 2 ℃. The air humidity of the clean room in autumn and winter is controlled at 30-50%, and the air humidity of the clean room in spring and summer is controlled at 50-70%.
Power distribution: clean room (area) of the main production land general illumination value is appropriate ≥ 300Lx; auxiliary studio, personnel clean and material clean with room, airlock room, aisle, etc. illumination value is appropriate for 200 ~ 300Lx.
Noise Control
1. During dynamic testing, the noise level in the 10,000-grade clean room shall not exceed 70 db A.
2. the noise level of the 10,000-class chaotic flow clean room cannot exceed 60 decibels A during static testing.
Airflow organization
The main air supply methods used in Class 100,000 clean rooms；
1、Partial orifice plate roof air supply；
2、With diffuser plate high efficiency air filter roof air supply；
3, the upper sidewall air supply and other three air supply methods.
The main methods of return air used in class 100,000 clean rooms.
1. Arrangement of return air opening at the lower part of the single side wall.
2、When using aisle return air, evenly arrange the return air inlet in the aisle or set the return air inlet centrally at the end of the aisle.
Air velocity of air supply outlet m/s：
1、Orifice plate orifice 3~5；
2、Side air supply outlet：
(1) Adherent jet 2~5；
(2) non-adherent jet with the lower side wall return air 1.5 ~ 2.5, the lower side wall return air 1.0 ~ 1.5.
Wind speed at return air outlet (m/s)：
1、The clean room return air outlet is not more than 2;
2. The return air outlet in the aisle is not more than 4.
Choose us Five advantages
Focus on food and drug, electronic industry clean room one-stop solution 18years since the establishment of a professional safety management system
18 years industry experience
1、18 years industry experience
◆ 18 years of precipitation
◆ 200 successful cases
◆ Repeat customers and word-of-mouth customers account for a high percentage
◆ Increasing number of well-known corporate clients
Construction Level 2 Qualified Enterprise
2、Construction Level 2 Qualified Enterprise
◆ Decoration Level 2 Qualification, Mechanical and Electrical Level 3 Qualification, General Contractor of Construction Level 3 Qualification
◆ Have a safety production license
◆ Self-built professional safety management system
◆ Zero major safety accidents since 18 years
3、60 technicians of all kinds
60 technicians of all kinds
◆ We can design and build high level GMP workshop class A and class 1 clean room
◆ Tailor-made design solutions
◆ Project design are strictly implement GB50073-2013\GB 50473-2008\GB50457- 2008 and other national standard clean specification and the United States federal 209E standard
Third party acceptance test verification
4、Third party acceptance test verification
◆ Self-provided full set of testing instruments, first self-test after third-party testing
◆ The project construction strictly implements national GMP, US FDA and EU Euro GMP and other domestic international standards.
Customer Focused
5、Customer Focused
◆ Complete standardized process to ensure the construction period and quality
◆ One year after the warranty period, take the initiative to visit 2 times and 1 time at home
◆ We are convinced that our work is only valuable if the users are satisfied.
Building 29, Lane 156, Changji Road, Jiading District, Shanghai
Project Case
Cleanroom products
Copyright © Shanghai Tobetter Purification Equipment Installation Engineering Co. LTD All rights reserved.
